Skip to content Skip to navigation Skip to footer
POLARIS OFF-ROAD VEHICLES

HELP CENTER

VIDEO: Installing Winch Autostop

The following video demonstrates how to upgrade the winch on your Polaris ATV with an autostop kit. The video includes removing the winch hook, fairlead and front cover (0:47); installing the new fairlead (1:11); connecting the harness (1:38); installing the lower front plastic cover and winch hook (2:40); making power and ground connections (3:28); and checking operation (5:28).

To install the kit, you will need a 13 mm socket and ratchet, 8 mm Allen wrench, pliers and T25 TORX® driver. Note that to use the autostop kit, you must install a synthetic rope in place of the steel cable. 

The autostop kit is part number 2881693. Read the installation instructions completely before beginning installation.

For proper winch operation, maintenance and safety tips, consult your Owner's Manual.

Check out the full selection of Accessories and Parts for more on Polaris winches and accessories. 

TORX® is a registered trademark of Acument Intellectual Properties, LLC