Parts for ATV Tracks
Certain Polaris® ATV models can be equipped with Prospector Pro® Tracks for all-terrain traction in winter weather. Listed below are the parts that make up the mounts and track kits for ATVs. Included are diagrams and the part numbers for spare part kits. Each diagram and parts listing is specific to that particular mount or track kit.
To order a replacement part for any aspect of your track system, see your authorized POLARIS Dealer. If you need a part not listed, also consult your POLARIS Dealer.
To ensure a mount or tracks kit is compatible with your ATV, click here to visit the accessories section of the ATV website and use the fitment tool at the top of the page.
MOUNTS
PROSPECTOR PRO Track Mount (Part Number 2879457)
Click here to view the instructions.
Click here to purchase the mount kit.
The following tables and diagrams list the parts included in the kits. Identification numbers correspond to the diagrams above each table. To order a part or kit, see your POLARIS Dealer.
Front anchor bracket:
| Item | Description | Quantity | Part Number |
| 1 | Front Bracket Kit | 1 | 2205406 |
| 2 | Front Left Anchor Bracket | 1 | — |
| 3 | Front Right Anchor Bracket | 1 | — |
| 4 | Front Bracket Cover | 2 | — |
| 5 | Hex Bolt-HCS, M10-1.5 x 55, 8.8 ZP, DIN931 | 4 | — |
| 6 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Rear anchor bracket:
| Item | Description | Quantity | Part Number |
| 7 | Rear Bracket Kit | 1 | 2205407 |
| 8 | Rear Left Anchor Bracket | 1 | — |
| 9 | Rear Right Anchor Bracket | 1 | — |
| 10 | Rear Bracket Cover | 2 | — |
| 11 | Hex Bolt-HCS, M10-1.5 x 75, 8.8, ZP, DIN931 | 4 | — |
| 12 | Washer-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Steering limiter assembly:
| Item | Description | Quantity | Part Number |
| 13 | Steering Limiter Cable Assembly | 1 | 2205456 |
| 14 | Steering Limiter Cable | 2 | — |
| 15 | Hex Bolt-HCS, M10-1.5 x 60, 8.8, ZP, DIN931 | 2 | — |
| 16 | Step Spacer | 2 | — |
| 17 | Washer-W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 2 | — |
| 18 | Nylon Nut-NN, M10-1.5, ZP, 8, DIN982 | 2 | — |
Suspension stiffener:
| Item | Description | Quantity | Part Number |
| 19 | Stiffener Kit | 1 | 2205471 |
| 20 | Suspension Stiffener | 1 | — |
| 21 | Nylon Nut-NN, M10-1.5, 8, ZP, DIN982 | 2 | — |
Wheel lug nut:
| Item | Description | Quantity | Part Number |
| 22 | Wheel Lug Nut-LN, M10-1.25 x 15, 8, ZP | 16 | 2205455 |
PROSPECTOR PRO Track Mount (Part Number 2879497)
Click here to view the instructions.
Click here to purchase the mount kit.
The following tables list the parts included in the kits. Identification numbers correspond to the diagrams above each table. To order a part or kit, see your POLARIS Dealer.
Front anchor bracket:
| Item | Description | Quantity | Part Number |
| 1 | Front Bracket Kit | 1 | 2205408 |
| 2 | Front Left Anchor Bracket | 1 | — |
| 3 | Front Right Anchor Bracket | 1 | — |
| 4 | Front Bracket Cover | 2 | — |
| 5 | Hex Bolt-HCS, M10-1.5 x 50, 8.8, ZP, DIN931 | 4 | — |
| 6 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Rear anchor bracket:
| Item | Description | Quantity | Part Number |
| 7 | Rear Bracket Kit | 1 | 2205409 |
| 8 | Rear Left Anchor Bracket | 1 | — |
| 9 | Rear Right Anchor Bracket | 1 | — |
| 10 | Rear Bracket Cover | 2 | — |
| 11 | Hex Bolt-HCS, M10-1.5 x 55, 8.8, ZP, DIN931 | 4 | — |
| 12 | Hex Bolt-HCS, M10-1.5 x 65, 8.8, ZP, DIN931 | 2 | — |
| 13 | Hex Bolt-HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 6 | — |
| 14 | Bushing-0.390 ID x 0.625 OD x 1,500L | 2 | — |
| 15 | Bushing-0.406 ID x 0.875 OD x 1,100L, YZN | 2 | — |
| 16 | Washer - 7/16 x 1.0 x 0.072, 8, ZP, USS | 4 | — |
| 17 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 6 | — |
| Item | Description | Quantity | Part Number |
| 18 | Wheel Lug Nut-LN, 3/8-inch x 24 Tapered | 16 | 2205457 |
PROSPECTOR PRO Track Mount (Part Number 2880072)
Click here to view the instructions.
Click here to purchase the mount kit.
The following tables list the parts included in the kits. Identification numbers correspond to the diagrams above each table. To order a part or kit, see your POLARIS Dealer.
Front anchor bracket:
| Item | Description | Quantity | Part Number |
| 1 | Front Bracket Kit | 1 | 2205397 |
| 2 | Front Left Anchor Bracket | 1 | — |
| 3 | Front Right Anchor Bracket | 1 | — |
| 4 | Front Bracket Cover | 2 | — |
| 5 | Hex Bolt-HCS, M10-1.5 x 50, 8.8, ZP, DIN931 | 4 | — |
| 6 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Rear anchor bracket:
| Item | Description | Quantity | Part Number |
| 7 | Rear Bracket Kit | 1 | 2205398 |
| 8 | Rear Left Anchor Bracket | 1 | — |
| 9 | Rear Right Anchor Bracket | 1 | — |
| 10 | Hex Bolt-HCS, M8-1.25 x 50, 8.8, ZP, DIN93 | 2 | — |
| 11 | Hex Bolt-HCS, 3/8-16 x 1.0, ZP, SAE, J429 | 4 | — |
| 12 | Washer-7/16 x 1.0 x 0.072, 8, ZP, USS | 4 | — |
| 13 | Washer-3/8 x 7/3 x 0.09, 8, ZP, USS | 2 | — |
| 14 | Nylon Nut-NN, 3/8-16, 5, ZP, ASME B18. 16.6 | 4 | — |
| 15 | Nylon Nut-FNN, M8-1.25, 8, ZP, DIN6926 | 2 | — |
Wheel lug nut:
| Item | Description | Quantity | Part Number |
| 16 | Wheel Lug Nut-LN, 3/8-24 x 15, 8, ZP | 16 | 2205457 |
PROSPECTOR PRO Track Mount (Part Number 2882109)
Click here to view the instructions.
Click here to purchase the mount kit.
The following tables list the parts included in the kits. Identification numbers correspond to the diagrams above each table. To order a part or kit, see your POLARIS Dealer.
Front anchor bracket kit:
| Item | Description | Quantity |
| 1 | Front Left Anchor Bracket | 1 |
| 2 | Front Right Anchor Bracket | 1 |
| 3 | Front Left Bracket Cover | 1 |
| 4 | Front Right Bracket Cover | 1 |
| 5 | Hex Bolt-HCS, M10-1.5 x 55, 8.8, ZP, DIN931 | 2 |
| 6 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 2 |
Rear Anchor Bracket Kit:
| Item | Description | Quantity |
| 7 | Rear Left Anchor Bracket | 1 |
| 8 | Rear Right Anchor Bracket | 1 |
| 9 | Hex Bolt-HCS, M10-1.5 x 200, 8.8, ZP, DIN931 | 2 |
| 10 | Spacer Bushing-0.50 ID x 1.00 OD x 1.00L | 4 |
| 11 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 2 |
Suspension stiffener kit (part number 2205471):
| Item | Description | Quantity |
| 12 | Suspension Stiffener | 1 |
| 13 | Nylon Nut-NN, M10-1.5, 8, ZP, DIN982 | 2 |
Steering limiter kit (part number 2205456):
| Item | Description | Quantity |
| 14 | Steering Limiter Mounting Disk | 2 |
| 15 | Steering Limiter Cable | 2 |
| 16 | Hex Bolt-HCS, M10-1.5 x 60, 8.8, ZP, DIN931 | 2 |
| 17 | Hex Bolt-HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 2 |
| 18 | Step Spacer | 2 |
| 19 | Washer - W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 2 |
| 20 | Nylon Nut - NN, M10-1.5, ZP, 8, DIN982 | 2 |
| 21 | Support Plate | 2 |
Wheel lug nut:
| Item | Description | Quantity |
| 22 | Wheel Lug Nut-LN, M10-1.25 x 20, 8, ZP | 16 |
TRACK KITS
PROSPECTOR PRO Tracks (Part Numbers 2881025, 2880020, 2881003 and 2879720)
Click here to view the User Manual, which is universal for all models. The User Manual includes installation instructions, adjustment procedures, break-in information, maintenance tips, torque specifications and troubleshooting solutions.
Click here to purchase track kit 2879720. Click here to purchase track kit 2880020. Click here to purchase track kit 2881003. Click here to purchase track kit 2881025.
The following diagrams and tables list the parts included in the tracks kit. Identification numbers and letters correspond to the diagram above each table. To order a part or kit, see your POLARIS Dealer.
| Item | Description | Quantity | Part Number |
| A | Kit - Frame, CAMOPLAST, Cast, ATV | 1 | 2205425 |
| 1 | Upper Carrier | 1 | — |
| 2 | Hub Cap POLARIS Assembly | 1 | — |
| 3 | HSBS, M6 - 1 x 10, 10.9 ZP | 1 | — |
| 4 | W, 9.9 x 6 x 0.9 AL | 1 | — |
| 5 | Sticker, Warning | 1 | — |
| 6 | Sticker - POLARIS ATV | 1 | — |
| 7 | Sticker - PROSPECTOR PRO ATV | 1 | — |
| 8 | ERR, 35, 2.4 ZP, SHR - 137 | 1 | — |
| 9 | Hub Bearing Kit | 1 | 2205123 |
| Item | Description | Quantity | Part Number |
| B | Kit - Frame, CMPLST, Plastic, FRT ATV | 1 | 2205426 |
| 1 | Front Plastic Base Assembly with Shafts | 1 | — |
| 2 | Track Guide | 1 | 2205428 |
| 3 | RWHS, 6 x 16, TX, ZP | 6 | 2205428 |
| Item | Description | Quantity | Part Number |
| C | Kit - Frame, CAMOPLAST, Plastic, RR, ATV | 1 | 2205427 |
| 1 | Rear Plastic Base Assembly with Shafts | 1 | — |
| 2 | Track Guide | 1 | 2205428 |
| 3 | RWHS, 6 x 16, TX, ZP | 6 | 2205428 |
| Item | Description | Quantity | Part Number |
| D | Kit - Sprocket, CAMOPLAST, 18 Tooth | 1 | 2205433 |
| 1 | Sprocket, CAMOPLAST XP, 18 Tooth | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
| Item | Description | Quantity | Part Number |
| E | Kit - Sprocket, CAMOPLAST, 20 Tooth | 1 | 2205432 |
| 1 | Sprocket - CAMOPLAST XP, 20 Tooth | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9 ZP, TL, DIN6921 | 4 | — |
| Item | Description | Quantity | Part Number |
| H | Kit - Hub, CAMOPLAST, 13 mm | 1 | 2205434 |
| 1 | Hub - CAMOPLAST XP 13 mm, Assembly | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL DIN6921 | 4 | — |
| 3 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| Item | Description | Quantity | Part Number |
| G | Kit - Hub, CAMOPLAST, 32 mm | 1 | 2205435 |
| 1 | Hub-CAMOPLAST XP 32 mm, Assembly | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
| 3 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| Item | Description | Quantity | Part Number |
| H | Kit -Wheel, CAMOPLAST, Mid, ATV | 1 | 2205122 |
| 1 | Wheel - ATV 134 mm | 1 | — |
| 2 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 3 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 1 | — |
| 4 | Wheel Seal (25 ID x 42 OD) | 1 | — |
| Item | Description | Quantity | Part Number |
| i | Kit -Wheel, CAMOPLAST, Idler, ATV | 1 | 2205121 |
| 1 | 202 mm ATV Wheel | 1 | — |
| 2 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 3 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 1 | — |
| 4 | Wheel Seal (25 ID x 42 OD) | 1 | — |
| Item | Description | Quantity | Part Number |
| J | Kit -Rocker, CAMOPLAST, Outer, ATV | 1 | 2205431 |
| 1 | ATV Stabilizer Assembly Male | 1 | — |
| 2 | Wheel - 134 mm ATV | 2 | — |
| 3 | 2 Lips Cap, 2-inch OD Tube | 2 | — |
| 4 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL DIN933 | 2 | — |
| 5 | Rubber Cone, Stabilizer | 1 | — |
| 6 | Wheel Seal (25 ID x 42 OD) | 2 | — |
| Item | Description | Quantity | Part Number |
| K | Kit -Rocker, CAMOPLAST, Inner, ATV | 1 | 2205430 |
| 1 | ATV Stabilizer Female Assembly | 1 | — |
| 2 | Dust Cap, Stabilizer | 1 | — |
| 3 | HCS, M10 - 1.5 x 45, 10.9, ZP, TL, DIN931 | 1 | — |
| 4 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| Item | Description | Quantity | Part Number |
| L | Kit - Bearings, CAMOPLAST, ATV | 1 | 2205123 |
| 1 | Internal Spacer | 1 | — |
| 2 | Standard Bearing | 2 | — |
| 3 | Shaft Seal - 50 x 62 x 10 TC | 1 | — |
| Item | Description | Quantity | Part Number |
| M | Kit - Track Adjuster, CAMOPLAST, ATV | 1 | 2205429 |
| 1 | Extruded Track Tensionner | 1 | — |
| 2 | CB, M10 - 1.5 x 70, 8.8, ZP, DIN603 | 1 | — |
| 3 | Tensioner Bushing | 1 | — |
| 4 | W, 20 x 10.5 x 2, ZP, DIN125A | 1 | — |
| 5 | FNN, M10- 1.5, 8 ZP, DIN6926 | 1 | — |
| 6 | Tensionner Rod - Hex Nut Assembly | 1 | — |
| 7 | Sticker - Loosen | 1 | — |
| Item | Description | Quantity | Part Number |
| N | Kit - Hyfax, CAMOPLAST, ATV | 1 | 2205428 |
| 1 | Track Guide | 1 | — |
| 2 | RWHS, 6 x 16, TX, ZP | 6 | — |
| Item | Description | Quantity | Part Number |
| O | Kit - Anti-Rotation, CAMOPLAST, ATV | 1 | 2205438 |
| 1 | Short Anti-Rotation Tubing Weldment | 1 | — |
| 2 | HCS, M10 - 1.5 x 60, 10.9 ZP, DIN931 | 1 | — |
| 3 | HFSCS, M12 - 1.75 x 50, 8.8 ZP, Full Thread | 1 | — |
| 4 | X-Long Rod End | 1 | — |
| 5 | Bushing Spacer | 1 | — |
| 6 | W, 374 x 13 x 3, ZP, DIN9021 | 1 | — |
| 7 | W, 7/16 x 1.0 x 0.072, 8 ZP, USS | 1 | — |
| 8 | FNN, M10 - 1.5, 8, ZP, DIN6926 | 1 | — |
| 9 | Stabilizing Rod Spring | 1 | — |
| 10 | Rubber Damper | 1 | — |
| Item | Description | Quantity | Part Number |
| P | Kit - Rear Damper, CAMOPLAST, ATV | 1 | 2205452 |
| 1 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 2 | — |
| 2 | Wheel Axle, Stabilizer | 2 | — |
| 3 | Axle, Rear Stabilizer | 1 | — |
| 4 | Rubber Cone, Stabilizer | 2 | — |
| Item | Description | Quantity | Part Number |
| Q | Kit - Hardware, CAMOPLAST, ATV | 1 | 2205125 |
| 1 | Sprocket Scraper | 1 | — |
| 2 | HSBS, M6 - 1 x 10, 10.9, ZP | 1 | — |
| 3 | HCSW, M10- 1.5 x 25, 8.8 ZP, TL, DIN933 | 12 | — |
| 4 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
| 5 | CB, M10 - 1.5 x 70, 8.8, ZP, DIN603 | 1 | — |
| 6 | HSFS, M10 - 1.5 x 80, 10.9 ZP | 2 | — |
| 7 | Spacer Washer | 2 | — |
| 8 | Tensioner Bushing | 1 | — |
| 9 | Alignment Shim Casting | 1 | — |
| 10 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 11 | W, 20 x 10.5 x 2, ZP, DIN125A | 1 | — |
| 12 | W, 1-1/4 x 3/8 x 1/8 ZP | 2 | — |
| 13 | NN, M10 - 1.5, ZP, 8 DIN982 | 2 | — |
| 14 | FNN, M10 - 1.5, 8 ZP, DIN6926 | 1 | — |
| 15 | Axle, Rear Stabilizer | 1 | — |
| 16 | Tensionner Rod - Hex Nut Assembly | 1 | — |
| 17 | Rubber Cone, Stabilizer | 2 | — |
| 18 | RWHS, 6 x 16, TX, ZP | 6 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| Item | Description | Quantity | Part Number |
| R | Kit - Anti-Rotation Bracket | 1 | 2205448 |
| 1 | Main Plate, Universal Anti-Rotation | 1 | — |
| 2 | HCS, M10 - 1.5 x 80, 10.9, ZP, DIN931 | 2 | — |
| 3 | W, 25 x 11 x 2, 8 ZP, USS | 4 | — |
| 4 | FNN, M10 - 1.5, 8, ZP, DIN 69261 | 2 | — |
| 5 | Retainer, Anti-Rotation | 1 | — |
| Item | Description | Quantity | Part Number |
| S | Kit - Decals, CAMOPLAST, ATV | 1 | 2205452 |
| 1 | Hub Cap POLARIS Assembly | 1 | — |
| 2 | Sticker - Loosen | 1 | — |
| 3 | Sticker - Warning | 1 | — |
| 4 | Sticker - POLARIS ATV | 1 | — |
| 5 | Sticker - PROSPECTOR PRO ATV | 1 | — |
| Item | Description | Quantity | Part Number |
| T | Kit - Caps | 1 | 2205120 |
| 1 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 2 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 3 | 2 Lips Cap, 2-inch OD Tube | 12 | — |
| 4 | Dust Cap, Stabilizer | 1 | — |
| 5 | Hub Cap POLARIS Assembly | 1 | — |
| Item | Description | Quantity | Part Number |
| U | Track - CAMOPLAST, Front, ATV | 1 | 5414840 |
| Item | Description | Quantity | Part Number |
| V | Track - CAMOPLAST, Rear, ATV | 1 | 5414841 |
| Item | Description | Quantity | Part Number |
| W | Rubber Cone, Stabilizer | 1 | 2205461 |
| X | ERR, 35, 2.4, ZP, SHR-137 | 1 | 2205454 |
Big Boss® 6x6 PROSPECTOR PRO Track System (Part Number 2882169)
Click here to view the sub-table instructions. Click here to view the track kit instructions. The track kit instructions include installation and adjustment procedures; as well as operation and maintenance information.
Click here to learn more about the track kit.
The following diagrams and tables list the parts included in the tracks kit. Identification numbers and letters correspond to the diagram above each table. To order a part or kit, see your POLARIS Dealer.
Front sub-table kit:
| Item | Description | Quantity | Part Number |
| 1 | Front Right Sub-Table Front Left Sub-Table |
1 1 |
2875813 2875811 |
| 2 | Anti-Rotation Frame | 1 | ** |
| 3 | Sliding Rod | 1 | ** |
| 4 | Rubber Bushing (60 duro) | 1 | 2875816** |
| 5 | Front Anti-Rotation Spring | 1 | ** |
| 6 | Spring Support | 1 | ** |
| 7 | 1/2-inch nf x 1-1/2-inch Hex Bolt | 1 | ** |
| 8 | 3/4-inch ID x 2-inch OD x 1/8-inch Flat Washer | 1 | ** |
| 9 | 1/2-inch nc x 2-1/2-inch Carriage Bolt | 1 | * |
| 10 | 3/8-inch nf FLange Nut | 4 | * |
| 11 | Front Right Sub-Table Clamping Plate Front Left Sub-Table Clamping Plate |
1 1 |
2875814 2875812 |
| 12 | Clamping Block | 1 | 2875807 |
| 13 | 3/8-inch nc x 1-3/4-inch Carriage Bolt | 2 | * |
| 14 | 3/8-inch dia Flat Washer | 4 | * |
| 15 | 3/8-inch nc Nylock Nut | 4 | * |
| 16 | 3/8-inch nc x 2-inch Carriage Bolt | 1 | * |
| 17 | Large Ball Joint Spacer | 1 | 2875808 |
| 18 | Short Ball Joint Spacer | 1 | 2875809 |
| 19 | 1/2-inch nc Nylock Nut | 1 | * |
| 20 | 1/2-inch dia x 1/2-inch nf Ball Joint | 1 | 2875859 |
| 21 | 1/2-inch nf Thin Nut | 1 | * |
| 22 | Tightening Spacer | 1 | * |
| 23 | 3/8-inch nc x 4-1/4-inch Hex Bolt | 1 | * |
* Denotes parts included in front hardware kit (one side only) 2206561
** Denotes parts included in front anti-rotation kit 2206560
Front track assembly parts (part number 2882169):
| Item | Description | Quantity | Part Number |
| 1 | Track | 1 | 2876987 |
| 2 | Main Axle Locking Washer | 1 | 2876988 |
| 3 | Adjustment Drive Socket | 1 | 2876989 |
| 4 | Serial Number | 1 | — |
| 5 | Sprocket (19 Teeth) | 1 | 2877669 |
| 6 | POLARIS Black Wheel (5.66 inches) with Rubber | 6 | 2877878 |
| 7 | POLARIS Black Wheel (10 inches) | 4 | 2876994 |
| 8 | Sticker (POLARIS Star Logo) | 1 | ** |
| 9 | Front Right Track Beam Front Left Track Beam |
1 1 |
2876995 2876999 |
| 10 | Cover Plate | 1 | 2876997 |
| 11 | Main Axle | 1 | 2876998 |
| 12 | Tensioning | 1 | — |
| 13 | Wheel Cap | 6 | * |
| 14 | Ball Bearing (WTW 6206) | 1 | 2877001 |
| 15 | Ball Bearing (WTW 6207) | 1 | 2877002 |
| 16 | Sticker "DANGER" | 1 | * |
| 17 | 1/4-inch nc x 3/4-inch Hex Bolt | 3 | * |
| 18 | 3/8-inch nc x 1-inch Hex Bolt | 10 | * |
| 19 | 3/8-inch nc x 2-inch Hex Bolt | 4 | * |
| 20 | 1/2-inch nc x 5-inch Hex Bolt | 1 | * |
| 21 | 3/8-inch nc x 2-1/2-inch Carriage Bolt | 2 | * |
| 22 | No. 10 x 1/2-inch Allen Socket Machine Screw | 5 | * |
| 23 | 1/2-inch nc Nut | 1 | * |
| 24 | 3/8-inch nc Nylock Nut | 6 | * |
| 25 | 3/8-inch Dia Lock Washer | 10 | * |
| 26 | 3/8-inch Dia Flat Washer | 2 | * |
| 27 | 3/8-inch ID x 1-1/4-inch OD x 12-inch Fender Washer | 8 | * |
| 28 | 76.5 mm Internal Circlip | 1 | 2877003 |
| 29 | 1.875-inch ID x 2.839 OD x 0.375-inch Seal | 1 | 2877004 |
| 30 | 1/4-inch nc Straight Zerk | 1 | * |
| 31 | 2.881-inch x 0.103-inch O-ring | 1 | 2877005 |
* Denotes part included in hardware kit 2877667 (one kit makes one track kit corner only).
** Denotes part included in hardware kit 2877425 (complete track kit).
Rear track assembly (part number 2882169):
| Item | Description | Quantity | Part Number |
| 1 | Track | 1 | 2204586 |
| 2 | Main Axle Locking Washer | 2 | 2876988 |
| 3 | POLARIS Black Wheel (5.66-inch) with Rubber | 12 | 2877878 |
| 4 | POLARIS Black Wheel (10-inch) | 4 | 2876994 |
| 5 | Sprocket (19 Teeth) | 2 | 2877669 |
| 6 | Sticker (POLARIS Star Logo) | 2 | * |
| 7 | Cover Plate | 2 | 2876997 |
| 8 | Main Axle | 2 | 2876998 |
| 9 | Rear Right Track Beam Rear Left Track Beam |
1 1 |
2204588 2204587 |
| 10 | Center Right Track Beam Center Left Track Beam |
1 1 |
2204590 2204589 |
| 11 | Wheel Cap | 12 | ** |
| 12 | Ball Bearing (WTW 6206) | 2 | 2877001 |
| 13 | Ball Bearing (WTW 6207) | 2 | 2877002 |
| 14 | Sticker (DANGER) | 2 | * |
| 15 | 1/4-inch nc x 3/4-inch Hex Bolt | 6 | * |
| 16 | 3/8-inch nc x 1-inch Hex Bolt | 16 | * |
| 17 | 3/8-inch nc x 2-inch Hex Bolt | 8 | * |
| 18 | 1/2-inch nc x 6-inch Hex Bolt | 2 | 2204591 |
| 19 | 3/8-inch nc x 2-1/2-inch Carriage Bolt | 1 | * |
| 20 | No. 10 x 1/2-inch Allen Socket Machine Screw | 10 | * |
| 21 | 1/2-inch nc Nylock Nut | 2 | * |
| 22 | 3/8-inch nc Nylock Nut | 10 | * |
| 23 | 3/8-inch Dia Lock Washer | 16 | * |
| 24 | 3/8-inch Dia Flat Washer | 1 | * |
| 25 | 3/8-inch ID x 1-1/4-inch OD x 0.12-inch Fender Washer | 13 | * |
| 26 | 76.5 mm Internal Circlip | 2 | 2877003 |
| 27 | 1.875-inch ID x 2.839 OD x 0.375-inch Seal | 2 | 2877004 |
| 28 | 1/4-inch nc Straight Zerk | 2 | * |
| 29 | 2.881-inch x 0.103-inch O-ring | 2 | 2877005 |
| 30 | 3/8-inch nc x 6-1/2-inch Hex Bolt | 1 | 2204592 |
| 31 | M10 x 100 mm Hex Bolt | 1 | * |
| 32 | M10 Nylock Nut | 1 | * |
| 33 | Tensioning Block | 2 | 2204593 |
| 34 | Pivot | 1 | 2204594 |
| 35 | Sleeve | 1 | 2204595 |
* Denotes parts included in hardware kit 2204596 (one kit makes one rear Track Kit corner only).
** Denotes part available in hardware kit 2877425 (six wheel caps per kit).
