Listed below are the parts that make up the plow mounts, frames and blades for Polaris ACE vehicles. Included are diagrams and the part numbers for spare part kits. Each diagram and parts listing is specific to that particular mount, frame or blade.
To order a replacement part for any aspect of your plow system, see your authorized Polaris Dealer.
To determine if a mount, frame or blade fits your ACE, visit the Accessories section of the ACE website. Enter your vehicle information in the fitment tool, shown below.
MOUNTS
Plow Mount (Part Number 2879634)
The following table lists which parts are included in the plow mount, as well as which spare kits replacements can be found in. The numbers in the table correspond to the above diagram and the individual kit diagrams found below. Replacement parts can be found in the ACE Mount Plate Kit (part number 2205388), ACE Hardware Kit (part number 2205695), Spring and Cable Kit (part number 2205696) and Winch Link Kit (part number 2205384).
For more information, view the installation instructions. To order a kit, see your Polaris Dealer.
| Item | Description | Quantity/Found In |
| 1 | Mount Plate Frame Assembly |
1x Plow Mount Kit (2879634) 1x Mount Plate Kit (2205388) |
| 2 | Cotter Pin Ø2 x 10 mm |
2x Plow Mount Kit (2879634) 2x Glacier Latch Kit (2205067) 2x Hardware Kit (2205695) |
| 3 | Spiral Pin Ø4 x 22 mm |
1x Plow Mount Kit (2879634) 1x Glacier Latch Kit (2205067) 1x Hardware Kit (2205695) |
| 4 | Tension Spring |
2x Plow Mount Kit (2879634) 2x Glacier Latch Kit (2205067) |
| 5 | Pedal Link |
1x Plow Mount Kit (2879634) 1x Glacier Latch Kit (2205067) |
| 6 | Link Rod |
1x Plow Mount Kit (2879634) 1x Glacier Latch Kit (2205067) |
| 7 | Rear Hooks |
1x Plow Mount Kit (2879634) 1x Glacier Latch Kit (2205067) |
| 8 | Height Locking Lever |
1x Plow Mount Kit (2879634) 1x Glacier Latch Kit (2205067) |
| 9 | Welded Pedal |
1x Plow Mount Kit (2879634) 1x Glacier Latch Kit (2205067) |
| 10 | Nylon Flange Nut M8-1.25 |
3x Plow Mount Kit (2879634) 3x Hardware Kit (2205695) 1x Spring and Cable Kit (2205696) |
| 11 | Adjustment Wire |
1x Plow Mount Kit (2879634) 1x Spring and Cable Kit (2205696) |
| 12 | Spring |
1x Plow Mount Kit (2879634) 1x Spring and Cable Kit (2205696) |
| 13 | Winch Link |
1x Plow Mount Kit (2879634) 1x Winch Link Kit (2205384) |
| 14 | Carriage Bolt, M8-1.25 x 25 |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 15 | Hexagonal Bolt, M10-1.5 x 70 |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 16 | Hexagonal Bolt, M10-1.25 x 35 |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 17 | Hexagonal Bolt, M10-1.5 x 50 |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 18 | Hexagonal Bolt, M8-1.25 x 45 |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 19 | Hexagonal Flange Bolt, M8-1.25 x 20 mm |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 20 | Hexagonal Nylon Nut, M6-1.0 |
4x Plow Mount Kit (2879634) 4x Hardware Kit (2205695) |
| 21 | Hexagonal Nylon Nut, M8-1.25 |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) 1x Winch Link Kit (2205384) |
| 22 | Lock Washer M10 |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 23 | Rocker |
1x Plow Mount Kit (2879634) 1x Glacier Latch Kit (2205067) |
| 24 | Socket Head Cap Screw M6-1 x 18 mm |
4x Plow Mount Kit (2879634) 4x Hardware Kit (2205695) |
| 25 | Spring Lock Washer M8 |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 26 | Hexagonal Flange Nylon Nut M10-1.5 |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 27 | "R" Pin Short Zinc Plated |
1x Plow Mount Kit (2879634) 1x Glacier Latch Kit (2205067) 1x Hardware Kit (2205695) |
| 28 | Short Flange Bushing |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 29 | Long Flange Bushing |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 30 | Half Lock |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 31 | Torsion Spring |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 32 | HDPE Washer |
4x Plow Mount Kit (2879634) 4x Hardware Kit (2205695) |
| 33 | Spacer |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 34 | Height Stopper |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 35 | Front Tightening Plate |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 36 | Square Tube Assembly |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 37 | Tightening Plate |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 38 | Plate 3 |
1x Plow Mount Kit (2879634) 1x Hardware Kit (2205695) |
| 39 | Flat Washer, M10 |
2x Plow Mount Kit (2879634) 2x Hardware Kit (2205695) |
| 40 | Fixation Frame |
1x Plow Mount Kit (2879634) |
ACE Mount Plate Kit (2205388):
ACE Hardware Kit (2205695):
Spring and Cable Kit (2205696):
Winch Link Kit (2205384):
Integrated Plow Mount Frame Attachment (Part Number 2882107)
The following table lists the parts included in the plow mount kit, as well as the spare kits replacements can be found in. Replacement parts can be found in the ACE Mount Plate Kit (part number 2205388), ACE Hardware Kit (part number 2205695), Spring and Cable Kit (part number 2205696) and Winch Link Kit (part number 2205384). The numbers in the table correspond to the above diagram and the individual kit diagrams found below.
For more information, view the installation instructions. To order a kit, see your Polaris Dealer.
| Item | Description | Quantity/Found In |
| 1 | Carriage Bolt, M8 x 1.25 x 30 |
2x Plow Mount Kit (2882107) 2x Hardware Kit (2205695) 2x Mount Plate Hardware Kit (2206415) |
| 2 | Cotter Pin, 2 mm x 10 mm |
2x Plow Mount Kit (2882107) 2x Glacier Pro Latch Kit (2205067) 2x Hardware Kit (2205695) |
| 3 | Hexagonal Bolt M10 x 1.5 x 70 |
1x Plow Mount Kit (2882107) 1x Hardware Kit (2205695) |
| 4 | Hexagonal Bolt M10 x 1.5 x 50 |
1x Plow Mount Kit (2882107) 1x Hardware Kit (2205695) |
| 5 | Hexagonal Flange Bolt M8 x 1.25 x 20 |
2x Plow Mount Kit (2882107) 2x Hardware Kit (2205695) 2x Mount Plate Hardware Kit (2206415) |
| 6 | Hexagonal Flange Nut M10 x 1.5 |
2x Plow Mount Kit (2882107) 2x Hardware Kit (2205695) |
| 7 | Hexagonal Nylon Nut M6 x 1.0 |
4x Plow Mount Kit (2882107) 4x Hardware Kit (2205695) |
| 8 | Hexagonal Nylon Nut M8 x 1.25 |
1x Plow Mount Kit (2882107) 1x Hardware Kit (2205695) 1x Winch Link Kit (2205384) |
| 9 | Hexagonal Nylon Flange Nut, M8 x 1.25 |
3x Plow Mount Kit (2882107) 3x Hardware Kit (2205695) 1x Spring and Cable Kit (2205969) 2x Mount Plate Hardware Kit (2206415) |
| 10 | Socket Head Cap Screw M6 x 1 x 18 mm |
4x Plow Mount Kit (2882107) 4x Hardware Kit (2205695) |
| 11 | Spiral Pin |
1x Plow Mount Kit (2882107) 1x Glacier Pro Latch Kit (2205067) 1x Hardware Kit (2205695) |
| 12 | Tension Spring |
2x Plow Mount Kit (2882107) 2x Glacier Pro Latch Kit (2205067) |
| 13 | "R" Pin Short Zinc Plated |
1x Plow Mount Kit (2882107) 1x Glacier Pro Latch Kit (2205067) 1x Hardware Kit (2205695) |
| 14 | Short Flange Bushing |
1x Plow Mount Kit (2882107) 1x Hardware Kit (2205695) |
| 15 | Long Flange Bushing |
1x Plow Mount Kit (2882107) 1x Hardware Kit (2205695) |
| 16 | Half Lock |
2x Plow Mount Kit (2882107) 2x Hardware Kit (2205695) |
| 17 | Torsion Spring |
1x Plow Mount Kit (2882107) 1x Hardware Kit (2205695) |
| 18 | Washer, HDPE |
4x Plow Mount Kit (2882107) 4x Hardware Kit (2205695) |
| 19 | Spacer |
2x Plow Mount Kit (2882107) 2x Hardware Kit (2205695) |
| 20 | Pedal Link |
1x Plow Mount Kit (2882107) 1x Glacier Pro Latch Kit (2205067) |
| 21 | Winch Link |
1x Plow Mount Kit (2882107) 1x Winch Link Kit (2205384) |
| 22 | Height Stopper |
1x Plow Mount Kit (2882107) 1x Hardware Kit (2205695) |
| 23 | Adjustment Wire |
1x Plow Mount Kit (2882107) 1x Spring and Cable Kit (2205969) |
| 24 | Link Rod |
1x Plow Mount Kit (2882107) 1x Glacier Pro Latch Kit (2205067) |
| 25 | Fixation Frame | 1x Plow Mount Kit (2882107) |
| 26 | Rear Hooks |
1x Plow Mount Kit (2882107) 1x Glacier Pro Latch Kit (2205067) |
| 27 | Height Locker Lever |
1x Plow Mount Kit (2882107) 1x Glacier Pro Latch Kit (2205067) |
| 28 | Welded Pedal |
1x Plow Mount Kit (2882107) 1x Glacier Pro Latch Kit (2205067) |
| 29 | Rocker |
1x Plow Mount Kit (2882107) 1x Glacier Pro Latch Kit (2205067) |
| 30 | Tightening Plate |
1x Plow Mount Kit (2882107) 1x Hardware Kit (2205695) 1x Mount Plate Hardware Kit (2206415) |
| 31 | Spring |
1x Plow Mount Kit (2882107) 1x Spring and Cable Kit (2205969) |
| 32 | Mount Plate Frame Assembly |
1x Plow Mount Kit (2882107) 1x Mount Plate Kit (2205388) |
| 33 | Threaded Cutting Screw, M6 x 1.0 x 20 |
2x Plow Mount Kit (2882107) 2x Mount Plate Hardware Kit (2206415) |
ACE Mount Plate Kit (2205388):
ACE Hardware Kit (2205695):
Spring and Cable Kit (2205696):
Winch Link Kit (2205384):
FRAMES
Glacier Pro Plow Frame (Part Number 2879630)
The following table lists the parts included in the plow frame kit, as well as which spare kits replacements can be found in. Replacement parts can be found by ordering the Shear Pin (part number 2205063), Clevis Pin Kit (part number 2205068), Plow Springs Kit (part number 2205382), Bumper Kit (part number 2205381), Pivot Hardware Kit (part number 2205380), Plow Pivot Kit (part number 2205379), Angle Selection Kit (part number 2205064) or Glacier Pro ATV Pins Kit (part number 2205062). The numbers in the table correspond to the above diagram and the individual kit diagrams found below.
For more information, view the installation instructions. To order a spare kit, see your Polaris Dealer.
| Item | Description | Quantity/Found In |
| 1 | Rivet |
4x Bumpers Kit (2205381) 4x Plow Pivot Kit (2205379) |
| 2 | CL8.8 M10-1.5 x 30 mm Carriage Bolt | 2x Pivot Hardware Kit (2205380) |
| 3 | Clevis Pin, Ø14 mm x 45 mm |
1x Clevis Pin Kit (2205068) 1x Angle Selection Kit (2205064) 1x Glacier Pro ATV Links Kit (2205062) |
| 4 | Clevis Pin, Ø14 mm x 60 mm |
1x Clevis Pin Kit (2205068) 1x Angle Selection Kit (2205064) 1x Glacier Pro ATV Links Kit (2205062) |
| 5 | Clevis Pin, Ø16 mm x 30 mm | 1x Glacier Pro ATV Links Kit (2205062) |
| 6 | Clevis Pin, Ø20 mm x 115 mm | 1x Glacier Pro ATV Links Kit (2205062) |
| 7 | Cotter Pin, Ø3 x 25 mm |
2x Clevis Pin Kit (2205068) 2x Angle Selection Kit (2205064) 5x Glacier Pro ATV Links Kit (2205062) |
| 8 | M8 Fender Washer | 1x Bumpers Kit (2205381) |
| 9 | CL8.8 M12-1.75 x 40 Hexagonal Bolt | 2x Pivot Hardware Kit (2205380) |
| 10 | M10-1.5 Self-Locking Nut | 2x Pivot Hardware Kit (2205380) |
| 11 | M12-1.75 Self-Locking Nut | 2x Pivot Hardware Kit (2205380) |
| 12 | M8-1.25 Self-Locking Nut |
1x Bumpers Kit (2205381) 2x Pivot Hardware Kit (2205380) |
| 13 | M8-1.25 Self-Locking Nut | 1x Bumpers Kit (2205381) |
| 14 | Plow Pivot Flange Sleeve | 2x Pivot Hardware Kit (2205380) |
| 15 | Tension Spring |
2x Angle Selection Kit (2205064) 2x Glacier Pro ATV Links Kit (2205062) |
| 16 | R-Pin |
1x Angle Selection Kit (2205064) 1x Glacier Pro ATV Links Kit (2205062) |
| 17 | Main Frame | — |
| 18 | Angle Lever | 1x Angle Selection Kit (2205064) |
| 19 | Angle Outer Tube | 1x Angle Selection Kit (2205064) |
| 20 | Locking Bar | 1x Angle Selection Kit (2205064) |
| 21 | Safety Pin |
1x Safety Pin (2205063) 1x Angle Selection Kit (2205064) 1x Glacier Pro ATV Links Kit (2205062) |
| 22 | Warning Decal | — |
| 23 | Pin |
1x Angle Selection Kit (2205064) 1x Glacier Pro ATV Links Kit (2205062) |
| 24 | Square Rubber Stopper | 1x Angle Selection Kit (2205064) |
| 25 | Impact Stopper | 1x Bumpers Kit (2205381) |
| 26 | Plow Pivot | 1x Plow Pivot Kit (2205379) |
| 27 | Adjustable Plow Stopper | 2x Pivot Hardware Kit (2205380) |
| 28 | Plow Tension Spring | 2x Plow Spring Kit (2205382) |
| 29 | Stopper |
2x Bumpers Kit (2205381) 2x Plow Pivot Kit (2205379) |
| 30 | Clevis Pin, Ø8 mm x 45 mm |
1x Angle Selection Kit (2205064) 1x Glacier Pro ATV Links Kit (2205062) |
| 31 | Clevis Pin, Ø16 mm x 70 mm | 1x Glacier Pro ATV Links Kit (2205062) |
| 32 | Handle |
1x Angle Selection Kit (2205064) 1x Glacier Pro ATV Links Kit (2205062) |
| 33 | M8-1.25 x 85 mm Eye Bolt | 2x Pivot Hardware Kit (2205380) |
Clevis Pin Kit (2205068):
Plow Springs Kit (2205382):
Bumper Kit (2205381):
Pivot Hardware Kit (2205380):
Plow Pivot Kit (2205379):
Angle Selection Kit (2205064):
Glacier Pro ATV Pins Kit (2205062):
Shear Pin (2205063):
In the event of a collision with an obstacle at a speed greater than that recommended for the system, the shear pin of the manual angulation mechanism will break to minimize the force of impact in the frame. If the shear pin is broken, see if another part is damaged. If any part is damaged, the impact velocity was greater than what the system is designed to support. You must then buy a replacement part from your Polaris Dealer.
If only the shear pin is broken, the pin can be removed and installed upside down and used again. Follow these steps to change the pin:
- Using a long nose pliers, remove the two tension springs (15) and then remove the pin retaining the angle lever (18).
- Remove the half-broken shear pin (21) and reinsert it upside down. You can get a new spare pin (23) from your Polaris Dealer.
- Put the pin back in place.
- Put the two tension springs back in place (15) using the long nose pliers.
Note that the shear pin is designed only to protect against the impacts affecting right and left ends of the plow. The pin does not protect the system from a central impact.
Always check the entire system after a failure to ensure that no damage occurred on other parts than on the pin.
BLADES
Glacier Pro Plow Blade - 66-Inch Poly (Part Number 2880269)
The following table identifies the parts in the blade and which spare kits replacement parts can be found in. Replacement parts can be found in the Wear Bar Kit (part number 2879867), the Skid Shoe Kit (part number 2205071), the R-Pin Kit (part number 2205070) and the 66-Inch Skin Kit (part number 2205069). The numbers in the table correspond to the above diagram.
For more information, view the installation instructions. Other accessory kits that are available for purchase are the Plow Marker Kit (part number 2872726), the 66-Inch Hardened Wear Bar Kit (part number 2879868) and the 66-Inch Rubber Deflector Flap Kit (part number 2879866). To order a replacement kit, see your Polaris Dealer.
| Item | Description | Quantity/ Found In |
| 1 | R-pin (Hairpin Cotter Pin Zinc Plated 82 mm Long - 4 mm Wire Dia) |
2x Skid Shoe Kit (2205071) 2x R-Pin Kit (2205070) |
| 2 | Rivet (Blind Rivet Round Head Type Steel Black Zinc Plated Ø4.8 mm x 13 mm x 16 mm Head) | 30x 66-Inch Skin Kit (2205069) |
| 3 | M8 x 1.25 x 25 mm Carriage Bolt | 10x Wear Bar Kit (2879867) |
| 4 | M8 x 1.25 Self Locking Hexagonal Nut | 10x Wear Bar Kit (2879867) |
| 5 | Warning Decal | — |
| 6 | Wear Bar | 1x Wear Bar Kit (2879867) |
| 7 | Blade Framing | — |
| 8 | Polyethylene Moldboard | 1x 66-Inch Skin Kit (2205069) |
| 9 | Plow Shoe | 2x Skid Shoe Kit (2205071) |
Glacier Plow Blade - 60-Inch Steel (Part Number 2879638)
The following table lists the parts included in the plow blade kit, as well as which spare kits replacement parts can be found in. Replacement parts can be found in the Wear Bar Kit (part number 2871806), Ski Shoe Kit (part number 2205071) and R-Pin Kit (part number 2205070). The numbers in the table correspond to the above diagram.
For more information, view the installation instructions. To order a kit, see your Polaris Dealer.
| Item | Description | Quantity/Found In |
| 1 | Blade (60 Inches) | — |
| 2 | Wear Bar | 1x Wear Bar Kit (2871806) |
| 3 | Skid Shoe | 2x Skid Shoe Kit (2205071) |
| 4 | M8-1.25 x 25 mm Carriage Bolt | 9x Wear Bar Kit (2871806) |
| 5 | M8-1.25 Nylon Nut | 9x Wear Bar Kit (2871806) |
| 6 | R-Pin |
2x Skid Shoe Kit (2205071) 2x R-Pin Kit (2205070) |
Glacier Plow Blade - 52-Inch Steel (Part Number 2879639)
The following table lists the parts included in the plow blade kit, as well as which spare kits replacement parts can be found in. Replacement parts can be found in the Wear Bar Kit (part number 2877210), Ski Shoe Kit (part number 2205071) and R-Pin Kit (part number 2205070). The numbers in the table correspond to the above diagram.
For more information, view the installation instructions. To order a kit, see your Polaris Dealer.
| Item | Description | Quantity/Found In |
| 1 | Blade (60 Inches) | — |
| 2 | Wear Bar | 1x Wear Bar Kit (2877210) |
| 3 | Skid Shoe | 2x Skid Shoe Kit (2205071) |
| 4 | M8-1.25 x 25 mm Carriage Bolt | 7x Wear Bar Kit (2877210) |
| 5 | M8-1.25 Nylon Nut | 7x Wear Bar Kit (2877210) |
| 6 | R-Pin |
2x Skid Shoe Kit (2205071) 2x R-Pin Kit (2205070) |
Shop the full collection of plow kits and parts.
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
