Passer au contenu de la page Passer à la navigation Passer au pied de page
VÉHICULES POLARIS HORS ROUTE

CENTRE D'AIDE

VIDEO: Sportsman 850 and XP 1000 Transmission Fluid Replacement

Required tools

Always wear safety glasses and nitrile gloves when servicing your Polaris ATV. To change the transmission fluid on your Sportsman 850 or XP 1000, follow these steps:

1. Park the vehicle on a flat, level surface.

2. Ensure the vehicle is in PARK.

3. Set the parking brake.

4. Place a drain pan underneath the transmission. Tip: Place a rag in the bottom of the drain pan to prevent the splashing of oil.

5. Clean the area around the fill plug.

6. Using an 8mm Allen socket, remove the transmission fill plug and set aside.

7. Clean the area around the drain plug. Tip: Place a rag under the drain plug to help prevent fluid from collecting on vehicle components.

8. Using an 8mm Allen socket, remove the drain plug and allow the oil to drain completely.

9. Clean any dirt or debris from the fill and drain plugs.

10. Inspect the O-rings on both plugs and replace if necessary.

11. Reinstall the drain plug. Torque to 10 to 14 ft-lbs (14-19 Nm).

12. Fill the gearcase through the fill plug hole until oil reaches the bottom threads and begins to spill out.

13. Reinstall the transmission fill plug. Torque to 10 to 14 ft-lbs (14-19 Nm).

14. Clean any residual fluid off the vehicle and inspect for leaks.

15. Dispose of the used fluid properly.

For more information, see your authorized Polaris Dealer. Find a dealer near you through the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.