Passer au contenu de la page Passer à la navigation Passer au pied de page
VÉHICULES TOUT-TERRAIN POLARIS
CENTRE D'AIDE
8/1/2022

P.A.S.S. Anti-Theft System for ATV

The optional PIN Activated Security System (P.A.S.S.) prevents unauthorized use of your ATV. When enabled, the vehicle cannot be operated until a valid passcode has been entered using the touchscreen display.

The PIN Activated Security System (P.A.S.S.) is available on the following vehicles:

  • Model Year 2022 Sportsman 570 Ride Command Limited Edition
  • Model Year 2022 Sportsman 570 Utility HD
  • Model Year 2022 Sportsman XP 1000 Ride Command Limited Edition
  • Model Year 2022 Sportsman XP 1000 Hunt Edition
  • Model Year 2022 Sportsman XP 1000 Ultimate Trail
  • Model Year 2022 Sportsman XP 1000 S

If PASS is enabled and the incorrect PIN is entered, the engine will not turn over or attempt to start. The PIN can be entered incorrectly five times before on the instrument cluster (if equipped) before locking out the user. Once locked out, a key cycle will reset the counter. On the Ride Command display, unlimited attempts are allowed.

If the Personal PIN is lost or forgotten, contact your dealer for your vehicle’s Master PIN.

Enable P.A.S.S.

Note: After activating P.A.S.S. for the first time, you must power down the vehicle and allow the electronic control module (ECM) to fully shutdown before restarting. This may take up to three minutes.

1. Go to the Settings Menu by pressing the Menu button. 

2. Select VEHICLE SETTINGS from the left toolbar. 

3. Select Engine Start Lockout. 

4. If this is your first time activating P.A.S.S., you will be prompted to enter a new passcode. Enter and verify the new passcode. Please record your passcode somewhere safe. 

5. Turn Engine Start Lockout from NO to YES.

6. Turn off the vehicle using the key ignition switch. 

Note: If the battery becomes low while the P.A.S.S. system is enabled, the gauge may show “New Vehicle Detected” after the battery has been recharged/replaced. Leave the key in the ON position to allow system reconfirmation.

Disable P.A.S.S.

1. Go the Settings Menu by pressing the Menu button. 

2. Select VEHICLE SETTINGS from the left toolbar. 

3. Select ENGINE START LOCKOUT.

4. Enter your passcode to disable P.A.S.S.

5. Toggle Engine Start Lockout from YES to NO. 

For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.

YouTube® is a registered trademark of Google Inc.

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.

Mots-clés security , pin , entry , vehicle , about ,